Yes, you can dismantle a typical domestic pool table yourself, provided you confirm the slate configuration first and line up enough helpers before you touch a spanner. One-piece slate tables are more forgiving; three-piece slate tables demand more hands and more caution. If you’re working alone, short on tools, or unsure about your table’s warranty terms, stop and book a professional removalist instead.
TL;DR:
- Check the slate configuration and warranty before dismantling: tables with three slate pieces generally require disassembly, and some manufacturers require authorized dealers to preserve coverage.
- Slate beds commonly weigh 200 to 400 kg, so tables with three slate pieces need at least four helpers or mechanical lifting aids.
- Remove pockets first, loosen rails in opposite pairs, identify whether felt is stapled or glued, then lift slate pieces vertically instead of sliding them.
- Support each slate piece across its underside on a plywood skid, pad its edges, and store it flat; upright storage needs professional bracing.
Table of Contents
- Clear the space, gather tools and protect finishes first
- How many people and what lifting gear you actually need
- A practical, ordered dismantle checklist you can follow
- Exactly how to lift, crate and store slate so it survives the move
- How to remove rails, aprons and legs and keep everything ready for reassembly
- Vehicle, insurance and hand-off checklist for the actual move
- Costly errors people make and the single corrective action for each
- Our practical tips for protecting fragile parts
- DIY versus professional: a publisher’s view
- Specialist pool table moving and how to get a quote
- FAQ
- Sources
Clear the space, gather tools and protect finishes first
Before any bolt comes out, clear a generous work area. Standard tables run to roughly 2.74 metres by 1.37 metres for a 9-foot table, and you’ll want clear floor space well beyond that footprint to lay down rails, felt and slate separately without anything overlapping.
Gather your tools before you start, not halfway through:
- A socket and ratchet set, screwdrivers, a staple remover and needle-nose pliers
- A flat pry bar, moving straps and lifting slings rated for heavy, awkward loads
- A plywood skid, moving blankets and a furniture dolly for the frame and legs
Protective gear matters just as much as tools. Wear gloves, safety glasses and knee pads, and keep moving blankets handy to cushion edges and corners as pieces come free. Take photos of the assembled table from several angles before you start, then mark matching parts with painter’s tape and store bolts and fittings in labelled resealable bags as you go.
Pro Tip: Photograph each rail joint and the underside of the slate before removal. It saves guesswork later and makes reassembly far less stressful.

How many people and what lifting gear you actually need
Slate is the part of the job that punishes shortcuts. Pool table slate beds commonly weigh between 200 kg and 400 kg, and full-size snooker slabs can exceed 500 kg. Slate is also brittle: flexing it or loading it at a single point can crack it in a way that’s effectively impossible to repair.
That weight dictates your crew size and gear:
- Two capable adults may handle a small one-piece slate table, but go cautiously
- Three-piece slate or larger tables need four or more people, or mechanical lifting aids
- Lifting straps, a plywood skid and purpose-built slings reduce the risk of a dropped or flexed slab
- A furniture dolly helps once the slate is supported flat on its skid
Check your warranty before you start. Manufacturers such as Olhausen require moving or servicing to be carried out by an authorised dealer, and using unauthorised movers can void a lifetime warranty entirely. If that applies to your table, DIY dismantling isn’t worth the risk, and it’s best to hire long-distance, cross-country, and international moving experts to handle the job safely and professionally.
A practical, ordered dismantle checklist you can follow
Work through the table in this order, and resist the urge to skip ahead:
- Final checks. Photograph the assembled table, protect the floor with blankets or cardboard, and clear a staging area for each component.
- Pockets first. Remove the pockets and their mounting hardware, bagging screws and brackets by pocket location so you know exactly where each set belongs.
- Rails in pairs. Undo the bolts holding the rails to the frame, working in opposite pairs to keep the frame from twisting. Mark each rail’s orientation with tape before it comes off.
- Felt next. Check whether the cloth is stapled or glued. Stapled felt lifts away with a staple remover worked gently along the rail edge; glued felt needs a slower, careful peel to avoid tearing or pulling up backing material.
- Slate. Remove the securing screws, then lift each slate piece straight up rather than sliding it. Many slates are keyed with dowels, and sliding can snap them. Use at least four people on heavy single pieces or a mechanical aid where available.
- Frame and legs. Disassemble the frame last, keeping levellers, brackets and screws together in their labelled bags for each leg.
Pro Tip: Never drag the table across the floor to reposition it during dismantling. Lift and carry, even for short distances, to avoid stressing joints and legs.
For a condensed version of this sequence, our five-step pool table moving guide walks through the same stages with a tighter focus on timing.
Exactly how to lift, crate and store slate so it survives the move
Slate cracks mainly from point loading and flexing, not from clean, supported lifts. The fix is straightforward: always lift vertically, never slide, and always support the full underside of the piece rather than gripping it at the edges.
- Use a plywood skid under each slate piece and secure it with straps before moving it anywhere
- Pad every edge and corner with bubble wrap or carpet underlay to prevent chipping in transit
- Store slate horizontally on a flat, fully supported surface whenever possible
- If upright storage is unavoidable, crate it with professional bracing rather than leaning it freely against a wall
| Slate configuration | Typical handling need |
|---|---|
| One-piece slate | Can often be crated and moved as a single unit on a supported skid |
| Three-piece slate | Must be fully disassembled for transport, with each piece crated separately |
How to remove rails, aprons and legs and keep everything ready for reassembly
Rails and aprons are usually bolted through the frame with hex-head bolts or lag screws rather than glued, so a socket set should get you through without stripping anything. Work slowly on stubborn bolts rather than forcing them.
- Keep leg levellers, mounting brackets and their screws together in one labelled bag per leg
- Wrap wood rails and aprons in moving blankets, securing them with tape rather than directly on the wood to protect the finish
- Stack rails flat rather than leaning them, which prevents long-term warping
- Label each rail’s orientation so reassembly doesn’t become a guessing game later
Vehicle, insurance and hand-off checklist for the actual move
A slate crate for a standard table typically needs a footprint close to the table’s own dimensions, with enough depth to allow padding on all sides, so measure your vehicle or ute bed against that before loading day.
- Photograph every component’s condition before loading, and keep receipts for any hired equipment or materials
- Note serial numbers where they’re visible, in case you need to make an insurance claim later
- Brief any helpers clearly on which pieces are keyed, which are fragile, and which corners need extra care
- If reassembly involves re-levelling the slate seams, that’s a job for a billiard mechanic rather than a general helper
Our guide on moving a pool table safely covers the transport phase in more depth if you’re coordinating multiple vehicles or a longer trip.
Costly errors people make and the single corrective action for each
Most expensive mistakes happen fast and are irreversible once slate is involved.
- Moving slate with too few people. Pause and recruit more help rather than pushing through. Given that slate can weigh over 200 kg, a two-person lift on a larger piece is a genuine risk, not just a strain.
- Pulling felt the wrong way. Identify whether it’s stapled or glued before you start removing it, so you don’t tear the cloth or gouge the slate underneath.
- Skipping labels. Mark slate and rail positions with painter’s tape and photos as you go, not after the fact.
- Ignoring warranty terms. Check the manufacturer’s warranty and contact them directly if you’re unsure whether DIY handling will void it.
Our practical tips for protecting fragile parts
When crews handle pool table removals, they crate slate individually, stage lifts so no single person bears the full load, and track goods in transit with live tracking so the location of a crated slab is always known. If your table carries an authorised-mover warranty clause, that’s the moment to call in specialists rather than finish the job yourself.

DIY versus professional: a publisher’s view
DIY dismantling can save money, but a cracked slate or voided warranty costs far more than the labour you saved. If your table is high value, three-piece slate, or warranty-restricted, professional handling is the safer bet. Keep a contingency budget regardless.
— EasyMovers
Specialist pool table moving and how to get a quote
When a table’s slate configuration, value or warranty terms make DIY too risky, pool table removals with crating, staged lifts and live tracking are handled so the table’s location is visible throughout the move. Tailored packing and moving arrangements are available to support NDIS participants where needed.

Most clients who call have already weighed up the labour against the risk and decided a cracked slate isn’t worth testing. You can check our moving rates or browse our pool table moving service in Melbourne to get a quote before your move date.
FAQ
How hard is it to dismantle a pool table?
It’s moderately difficult: the mechanical steps are straightforward with basic tools, but the slate’s weight and brittleness make it the hardest part to get right. A one-piece slate table is far more manageable solo than a three-piece configuration, which needs several helpers.
How much does it cost to dismantle a pool table?
Costs vary depending on whether you DIY or hire help; our local or regional moving rate starts from $179 per hour, with additional movers charged at $79 per hour each. Stairs, bigger trucks and weekend work carry separate fees listed on the same rates page.
Do pool tables have to be disassembled to move?
Not always: many domestic tables with one-piece slate can sometimes be crated and moved as a single unit, while three-piece slate tables generally must be fully disassembled for safe transport. Checking your table’s slate type first tells you which path applies.
How do you get rid of a pool table?
If you no longer want the table, options include selling it intact, donating it, or having it dismantled and removed as part of a broader furniture clearance. Our furniture disposal and charity run service can take unwanted items off your hands once they’re dismantled.
Sources
Recommended
- How To Move A Pool Table Safely
- Pool Table Removals Melbourne Done Right
- Pool Table Movers In Melbourne
- Move A Pool Table In 5 Easy Steps